Internet Tablet Talk
Windows

Know The Exclusive Ways To Fix “We Couldn’t Update The System Reserved Partition” Without Any Hassle

While you are trying to install the latest version, then you might face the Update error and get stuck with the annoying message, “we couldn’t update the system reserved partition“. Moreover, it hampers the entire system and the active programs start to crash immediately. Besides this, the system starts to freeze on a frequent basis. Furthermore, it reduces the system’s performance and protects your device from unauthorized access. However, we are going to discuss here some of the effective steps to overcome the update error quickly.

Major Issues Behind “Windows 10 We Couldn’t Update The System Reserved Partition” Problem:

Some technical issues become critical while upgrading the system reserved partition. Moreover, it hampers the entire sector of the system reserved section and creates this annoying message, “Windows 10 we couldn’t update the system reserved partition“. So, know the effective reasons behind this critical error that helps to identify the problem at the initial stage.

  • If the system reserved partition is full, then you can encounter the update error regarding the System Reserved partition.
  • Some of the third-party software such as antivirus and other security apps create a barrier in upgrading the System reserved partition.
  • System Reserved partition update problem might also occur due to a corrupted file system. If any problem is found in this area, then you might face this conflict.

Resolve “We Couldn’t Update The System Reserved Partition” With Effective Ways:

Listed below are some prominent ways which will help you to tackle the Windows update problem easily. Here, we are going to talk about some of the effective ways that will resolve the Windows 10 partition error easily. So, you may try out the steps below and avoid this annoying issue quickly.

Method 1: Free Up Memory Spaces for Reserved Partition

  1. First, press the Windows key and R together from the keyboard and launch the Run application window.
  2. Now, type “diskmgmt.msc” in the Run dialog box and hit the OK button to open the Disk Management window. Now, locate the partition map under the list of mounted volumes in the Disk Management window.
  3. Next, set the first partition name as System Reserved or Data and it will be fixed in the max 100MB size. Right-click on the hard disk partition and choose Change drive letters and paths from the pop-up menu.
  4. Then, click on Add and open the drop-down menu in front of the drive letter option. Select Y as a drive letter and hit the OK button.
  5. After that, restart the device in Normal mode and type “cmd” in the Cortana search box to locate the Command Prompt option in the list.
  6. Next, right-click on the Command Prompt and select Run as Administrator from the pop-up menu.
  7. Then, run the command “takeown /f. /r /d y”, “Administrator with <Username>”,”  . /grant administrator: F /t”, “attrib -h -s -r bootmgr” and hit the Enter key from the keyboard to run the commands.
  8. After that, open the Windows Explorer window and navigate to Y drive.
  9. Choose the Organize option. Now, click on Folder and choose Search options under it. Then, check whether View isdisabled or not.
  10. Make sure that both the Don’t show hidden files, folders or drives option and the Hide protected operating system files (recommended) options are disabled.
  11. Once the process reaches to the last section, then NTFS log file of the System Reserved partition will be trimmed down automatically. This process will help to free up the half memory spaces.
  12. Finally, upgrade the Windows with the latest version and go to the Disk Management Utility window. Now, remove the Y drive letter from the System Reserved Disk Partition.
  13. Now, restart the system and verify whether the error message, “we couldn’t update the system reserved partition” appeared on the screen or not.

Method 2: Turn Local Drive to Active Partition

  1. Press the Windows key from the keyboard and type “diskmgmt.msc” in the search box.
  2. Now, go to the bottom section of the Disk Management window and navigate to the Partition map.
  3. Then, right-click on the Local C drive on Mark Partition and select Active from the list. After that, turn the C drive into the Active hard disk partition.
  4. Finally, reboot the PC and try to upgrade the system after a successful boot up in Normal Mode.

Method 3: Expand Reserve Partition via Disk Management

  1. First, type”diskmgmt.msc” in the search box and locate this program from the Start Menu.
  2. After that, click on it and open the Disk Management window. Then, navigate to the Partition Map from the bottom of the window.
  3. Then, right-click on the C drive and click on Shrink Volume from the list appeared on the screen.
  4. Shrink the Local Drive by 300-350 MB and right-click on the System Reserved Partition.
  5. Now, choose Expand Volume from the list and try to expand that partition in such a way that it incorporates the hard drive up to 350Megabytes.

Finally, reboot the system after applying the new changes and then verify whether this solution resolves the ‘we couldn’t update the system reserved partition” issue or not.

Method 4: Enlarge EFI Partition

  1. First, download the Mini Reserved Partition tool from a trustworthy website.
  2. Now, create a  MiniTool Partition Wizard Boot Disc and reboot your system via this effective tool. It will help to get the partition layout of the system reserved partition.
  3. After that, locate the ESP partition which is marked as Active. Enlarge it to increase the memory spaces.
  4. Next, delete the Microsoft Reserved Partition by browsing the data from the Local (C:\) drive. It removes 128 MB Microsoft Reserved Partition and you can perform it without any worries as it doesn’t harm any data.
  5. Then, choose the EFI system partition and select the Extended Partition feature from the left panel of the window. Go to Take Free Spaces from this section and choose C drive under it. Here, you can decide how much you want to keep free spaces by dragging the slider.
  6. Click on the OK button to confirm and go back to the main interface.
  7. Finally, hit the Apply button and save the new changes. Hit the OK button and close the window. Once done, reboot the system and verify whether the error message, “Windows 10 we couldn’t update the system reserved partition” still appears on the screen or not.

Method 5: Via Media Creation Tool

  1. First, go to the Microsoft official website and download the Media Creation Tool from that website.
  2. After a successful installation, select the Create Installation Media (USB flash drives, DVDs, and ISO files) from the home screen displayed from that tool.
  3. Now, choose language, edition and architecture properly based on the PC configuration. Make sure that to select appropriate settings if you want to use the USB as a bootable device.
  4. However, click on the Next button and select the USB flash drive option while the device screen prompts with two choices USB and DVD.
  5. Again, tap on the Next button and select the removal drive appears in the list displayed on the screen. Choose the correct storage device to connect it to the computer.
  6. After that, click on the Next option from the same window and download the files that will be proceeded by Media Creation Tool. It will create a bootable media that works on legacy BIOS.
  7. Then, open a Command Prompt window and insert a DVD or USB that you want to use as a portable Windows 10 storage media. After recognizing the drive by your system, type D: in and command prompt window and press the Enter key.
  8. Again, type “setup” and run the Update installer. The upgrade process time will be dependent on the performance of bootable media.
  9. When done, reboot the system and verify whether the Windows Disk reservation partition error still persists or not.

Method 6: Disable the System Security Software

  1. First, click on the Start menu and select the Settings app from that list.
  2. From the Settings window, choose the System and Security icon and double-click on it.
  3. Next, go to the Security section from the Windows Security tab from the left panel of the window.
  4. Now, choose the Virus and Threat Protection option from the list of various options and open the Windows Defender Settings window.
  5. Select Virus Protection and tap on the Disable button and turn it off temporarily. Then, reboot the system in Normal Mode and check whether the annoying message, “we couldn’t update the system reserved partition” still pops-up or not.

Summing Up

In the above article, we have discussed the effective solutions to overcome the unexpected error message, “we couldn’t update the system reserved partition“. Moreover, it helps to enhance system performance by using the partition technique. Furthermore, we have defined the significant issues behind this annoying problem. So, hope that this content will be helpful to avoid all the possible conflicts of partition update process permanently.

Related posts

Is the Volume Icon Missing On Your Computer?

Nathaniel Villa

Flash Drive Not Showing Up: Technical Resolution At Its Best

Nathaniel Villa

Get Effective Solutions To Get Rid Of The Application Load Error 5:0000065434

Nathaniel Villa