Most of Windows 10 users unexpectedly encounter this issue with their Operating System. Very often, they get stuck on the loading screen and an error message suddenly pops out displaying Windows 10 stuck on getting Windows ready error. Actually, this is a very annoying issue which occurs at times when you are trying to turn on, or turn off or even restart your computer. If your Windows laptop or desktop get stuck with this error, then don’t let this bother you anymore.
Unfortunately, if you also run into this issue and your PC becomes a victim of Windows 10 stuck error, then follow this post.
Proven Ways To Eliminate The Windows 10 Stuck On Getting Windows Ready Error
If your PC has been incidentally trapped in the Windows 10 stuck on getting Windows ready issue, then without worrying more, you should go through this article. Here you will get effective solutions which will prove beneficial in resolving this issue. You just need to perform one step and see whether it works for you or not. If it does not work, then you need to move further to the next step and so on until and unless the issue gets resolved.
Solution 1: Wait For Some More Time
While your system might be downloading and installing files or doing some important tasks in the background, your computer might display “Windows 10 stuck on getting Windows ready” error message. So your system might take some time to finish these jobs. Therefore, if you are interested to boot your computer normally, then you need to wait for some time. You need to wait until and unless the system completes its task and get out of the screen.
But if you have waited for some time, say about 2 to 3 hours, and still find that the screen disappears, then you can try some other solutions listed below.
Solution 2: Run System File Checker
Generally, if you have corrupted files on your computer, your Windows screen might show the Windows 10 install stuck on getting ready error. Thus, if you want to solve this issue, you need to run the System File Checker. For Windows users, the System File Checker utility is a built-in tool. This inbuilt tool is used by Windows users for scanning and restoring corrupted system files on your computer.
You can use this inbuilt tool to fix this corruption issue and before you follow the steps to run System File Checker, you will need a Windows Installation Media. So be prepared with that and then go through the steps mentioned below to fix the issue:
- First of all, put your Windows installation media into the computer and try to boot from it.
- After that, select your location and language and click on Next.
- Then, click on “Repair your computer” option and choose “Troubleshoot”.
- Thereafter, select the “Command Prompt” to open this window.
- As soon as this window opens, you need to type “sfc/scannow” in it.
- Next, hit on the Enter button from your keyboard and wait for the remaining process to be completed.
- Finally, you can close the Command Prompt window and select the option “Turn off your PC.”
After performing these steps, you need to turn on your computer and check whether the error persists.
Solution 3: Reset Your Computer
If you are encountering corruption issues in your computer such as Windows 10 stuck on getting Windows ready, then power resetting your computer will be a useful way to fix this. If you power reset your computer, it will not only clear all the information from your system memory but at the same time, it will not damage your data.
So, if you want to get out of the loop of “Getting Windows-ready” and power reset your computer, then you can do so by following the steps described below:
- First of all, turn off your computer and unplug all the peripheral devices from your computer such as external hard drive, headphone, USB flash drive and so on.
- Also, unplug the power cable from your computer and battery from the battery compartment of your laptop.
- Then, press the Power button on your computer and hold it the same way for approx 30 seconds.
- After that, put the battery in its compartment and plug back the power back into your computer.
Then, you need to turn on your computer and see whether the error disappears or not. In case, the error still remains and this method fails to work for you, then you can opt to go for the next method.
Solution 4: Update Your Device Drivers
If wrong or outdated drivers on your computer are the cause behind the occurrence of the Windows 10 install stuck on getting ready error, then you need to update your device drivers on your computer. You can either do it manually or can opt for the automatic procedure. If you have some technical knowledge, then you can do it manually. For that, you need to visit the official website of the manufacturer of the device. From there, you need to find the most appropriate drivers for your device and then install and update it.
But if you lack technical knowledge, then updating device drivers manually will be quite risky. As there are chances that you might download and install the wrong drivers on your computer. Under such circumstances, you can opt to download and install a third-party tool in your Windows system. This will automatically update the device drivers whenever any new version is available. Even these tools will automatically scan and detect any problematic drivers if present.
Solution 5: Perform A System Restore
This solution can only be applied if you have created a system image backup or system restore point with Windows snap-in tools. In the event of Windows 10 stuck on getting Windows ready, you can use the image file or restore point to restore your PC to a normal state. Because at this time, your system becomes unbootable.
You can easily perform a system restore or system image recovery by following the steps described below:
- You need to go to the Microsoft website and download Media Creation Tool from there.
- Then, by running this tool, you need to create Windows installation media.
- After that, from the USB drive or disc, you need to boot the PC. Then, configure the time, language and keyboard method.
- Then, click on the option “Repair your computer” and go to ” Choose an option.”
- From there, choose Troubleshoot option and then select Advanced options.
- Then, choose the “System restore” option. Next, you need to follow the wizard to get rid of the Windows ready loop in Windows 10.
As an alternative, if you have a system image, then you need to choose “System Image Recovery” option from the “Advanced options” tab. Then, with the help of the image backup, you need to restore your computer to its early state.
Solution 6: Perform A Startup Repair From Windows 10
If your Windows 10 stuck on getting Windows ready, then you can try this method to fix the issue. For performing these steps, you need to enter the Windows Recovery Environment through Windows Installation disc. After that, you need to navigate to the Advanced Options page. From there, choose the option “Startup Repair” to fix this Windows getting ready stuck issue. If you still find that error message popping up in your PC, then you should try another solution.
Solution 7: Reinstall Your Windows
If you find none of the above methods help you in resolving this error in your Windows PC, then the last thing that you can try on your own is to reinstall your Windows system. To do that, at first, you need to put the Windows installation disc on your computer. Then, just you have to follow the on-screen prompts to complete the installation procedure. After doing this, you can check whether you get rid of this issue or not. Before performing these, it is advised to backup all your important data and information from your operating system. This is because while performing these steps, it will erase all the data on the partition.
Hope that by trying out these quick-fixes, you can easily solve Windows 10 stuck on getting Windows ready error. But even after following these methods, if you face this error in your Windows PC, then get in touch with a professional to find some other ways to get rid of this annoying error permanently.