Windows 10 Keeps Restarting: Get The Most Suitable Workarounds At Your Fingertips

Is your Windows 10 device stuck in an endless reboot loop? Are you searching for reliable ways to overcome this error?


If yes, then you are in the right place. Here, in this article, you get to know multiple troubleshooting ways by which you can easily deal with this error.


But, before that, you must know the basic details about this error. Basically, the Windows 10 keeps restarting is often result of the corrupted or faulty system components, outdated device drivers. Besides these, there can be some other factors that can also trigger this error.


In such situations, users find that their Windows 10 device spontaneously reboots in the middle of the boot process. And, in the end, the system gets stuck in this same reboot loop and never boot completely.

Easy Methods to Overcome Windows 10 Keeps Crashing and Restarting

Follow the upcoming section and manually resolve the Windows 10 keeps restarting issue. Ensure that you implement the below-discussed methods in the same order as instructed to get the fruitful result.

Workaround 1: Turn Off the Automatic Restart Option

Whenever you find that your Windows 10 machine keeps rebooting after installing the Windows update, the very first thing that you require to perform is to disable/turn off the Automatic Restart option.


This process will allow you to stop the Windows 10 device from rebooting automatically. You can perform this action by going through the undermentioned steps:


  • To start this process, turn on your Windows 10 device. Before the Windows logo appears on the display screen, hit the F8 key from the keyboard.
  • The Boot Menu will appear on the screen.
  • Once the Boot Menu appears on the screen, choose the Safe Mode option from it and tap on it. Then, boot your Windows-based machine through Safe Mode.
  • Now, hold the Windows Home key and press the R button to launch the Run box.
  • Once the Run box opens, type “sysdm.cpl” and hit the Enter button or click on the OK button.
  • After that, navigate to the Advanced tab and go to the Startup and Restart section.
  • Click on the Settings and locate the Automatically Restart button under System Failure.
  • Uncheck the Automatically Restart button. Make sure “Write an event to the system log” box is selected.
  • Now, save all the new changes by tapping on the Apply button and OK button. Check whether the Windows 10 still stuck in the reboot loop or not.

Workaround 2: Remove Corrupted Registry Files

Primarily, tap on the Search icon and tap on the Run window. Then, type “regedit” in the Run box and hit the Enter key or choose the OK button.


After that, you must navigate to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList


Before executing any changes, assure that you have a complete backup of the Windows Registry files. This ensures that you can surely undo the blunder you made.


Now, browse through the ProfileList IDs and look for the ProfileImagePath. If you locate any, then remove it immediately.


After that, make the required changes by following the on-screen prompts. Once you are done, close the Registry Editor window and close all the windows.


Now, reboot your Windows 10 device in order to examine whether the issue still arises or not.

Workaround 3: Reinstall the Graphics Card Driver

Locate the Windows Home key on your keyboard. Once you locate it, press it along with the X key. Now, in the search field, write “Device Manager” and hit the Enter button or tap on the OK button.


Now, initiate the Device Manager window and find out the Graphics Card Driver in it. Right-click on the “Graphics Card Driver” and select the “Uninstall/Remove” button from the resultant list.


After that, look for the “Delete the Driver Software for this Device” option and tap on it to select the checkbox. Hit the OK button twice to confirm the process.


Once the Graphics Card Driver has been removed from your Windows 10 device, reboot your PC. Then, download the updated version of Graphics card Driver from the manufacturer’s site by following the online instructions.

Workaround 4: Reset the Advanced Power Settings

After reinstalling the Graphics Card Driver, if you still encounter the same issue, then you have to reset the Advanced Power Settings.


Go to the Start icon and then write “Power Options” into the Search dialog box and hit the Enter key or click on the OK button.


Now, a new window will pop up on the screen. Here, you will get a list of Options. Choose the Power Options and click on the “Change Plan Settings’ from the resultant menu list.


Then, locate and select the “Change Advanced Power Settings” and click on it. Navigate to the “Processor Power Management.”


Here, you might observe the Minimum Processor State value is set to 100%. Change the value to 0 and hit the Apply button as well as the OK button. Now, the new changes will be saved.

Workaround 5: Check for Hardware Issues

Faulty hardware can also trigger Windows 10 keeps crashing and restarting error. Therefore, here are some of the feasible hardware issue that you require to check:


1. RAM

The error might begin from the RAM (Random Access Memory). Therefore, examine the RAM and check the condition of the slot.


Remove the RAM from the slot and then clean them carefully. After that, insert the RAM carefully and verify if the issue gets resolved or not.

2. CPU

Overheating might also get your Windows 10 system stuck in an endless reboot loop. Thus, you must review whether the CPU is working properly or not.


Here, clear out the dust from the CPU. Make sure that the fan and its enclosing areas are properly cleaned.


Restart your Windows-based device and verify if the device restarts in its normal mode without any issue.

3. External Devices

Remove all the external devices and turn on your system. Then, check if the error gets terminated from your device.


If your device is properly working, then there might be something wrong with one of the external devices.


You can determine the problematic external device by plugging them one by one. Be sure that you reboot your system after connecting each external device to identify which one is triggering this error.

Workaround 6: Scan for Malware or Virus

It is probable that your system has been affected by a serious virus or malware. Aa a result, your system stuck into the reboot loop.


In such situations, you can scan your entire device using the Windows Defender which a built-in Windows feature. On the other hand, you can also use top-notch antivirus application.

Steps to Run Windows Defender:

  • At first, select the Start icon and then write “Control Panel” into the search field and hit the Enter key. Then, choose the top result to open the experience.
  • Now, in the Control Panel window, initiate the Administrator Tools and hit the option “Edit” Group Policy” from the resultant menu list.
  • After that, launch the Computer Configuration and click on the Administrator Templates. Then, go to the Windows Components and click on the Windows Defender Antivirus.
  • Now, you will see the Turn off Windows Defender Antivirus button on the screen.
  • Be sure that the option is set to the Configured or Turned On. If not, then click on it and turn it on.


Now, Windows Defender will scan your entire device and look for the corrupted or missing system files. Once it finds it, it will repair them automatically.

Reset the System

If none of the above methods works, then you have to perform this method. You can reset your system by following the steps underneath:


Step 1: At first, hold the Windows Home key and press the I key simultaneously. Then, launch the Settings. In the Settings window, click on the Update and Security option from the resultant list.


Step 2: Now, select the Recovery button from the left menu and hit the option “Get Started” which is located under the Reset his PC. Follow the on-screen guidelines in order to complete the process.

Summing Up

In the above section, we have mentioned some of the effective methods by which you can easily overcome the Windows 10 keeps restarting error.


But, if you have further queries or questions regarding this error, then let us know in the feedback section below. Furthermore, you can also get in touch with expert technicians for instant help.

Nathaniel Villa
Nathaniel Villa