Lenovo is one of the best brands in our tech market. It holds an esteem position among the top references of users by providing the advanced features and top-class productivity. The laptops developed by Lenovo offers you with better durability compared to all it others counterparts. But the Lenovo laptops are not free technical glitches.
The users of the Lenovo laptop often face the problem Lenovo laptop stuck on boot screen. The power button of the laptop works fine but when you are going to turn on or off the system, then nothing else works. If you are facing this problem, then there is nothing to get worried. Go through the below article. Here we will provide some easy solutions to fix the problem easily. Hence, read along.
Amazing Tricks To Fix Lenovo Laptop Stuck On Logo Screen
Follow the methods given below to fix the problem.
Method 1: Boot The Laptop In Safe Mode
To fix the ‘Lenovo laptop stuck on loading screen’ issue, at first start the system in safe mode. It is one of the best troubleshooting methods because it can start the system in a confined state. The driver needs a few basic files to run the Windows in a proper way. Booting the laptop in safe mode is very useful to troubleshoot the problems with programs and drivers which may not spring correctly or may result in ‘Lenovo laptop stuck on logo screen’ problem. To boot the system in safe mode you need to perform the following steps:
Restart the Lenovo laptop in a normal way. Then restart by holding the Shift key from the keyboard. Move the cursor to the Sign in.
After that, press the Windows key and R from the keyboard to boot the Windows forcefully in safe mode. Now reboot your Lenovo laptop.
Method 2: Change Settings To Default
You can resolve the ‘Lenovo laptop stuck on boot screen’ issue by resetting the Basic input/output system setting of the Lenovo laptop to default. To perform the resetting process you need to follow the below steps:
At first, restart the Lenovo laptop. Then move the cursor to the left bottom corner of the screen and hit on the Start logo. Click on the drop-down sign of the ‘Shut down’ option. Choose Restart from the list.
To Enter the Basic input/output system in Lenovo laptop you have to hit the F2 key from the keyboard. After accepting the command the pop-up shows the ‘Entering Setup’ message. The keys may vary depending on the model. When the system runs the booting process then it will show the required key.
After completing the loading, hit the F9 key from the keyboard to load the default and reset it to the default. At the bottom of the screen, this is also showed as an option. Or, you can press the Alt key and F from the keyboard or just hit the Load Defaults button which is located at the bottom of the display. After that, you have to load the factory defaults with this.
After that enter the Esc from the keyboard. Then hit on the Save option. And click on Exit. Hit the Enter key from the keyboard to save the changes. Now you can exit from the Basic input/output system screen. To exit from the screen press the Alt key and F4 from the keyboard. After that, restart the system to reset the setting of the Basic input/output system.
Method 3: Restore Windows On Lenovo Laptop
Try to restore the system to resolve the ‘Lenovo laptop stuck on loading screen’ issue. Before performing the restoring procedure you need to take a backup of the whole system. It can help you to prevent the data loss situation. To restore the Windows on the system you need to perform the below steps:
Turn on the system normally. Before the Windows logo loading seen on the display, you need to hit the F8 key from the keyboard. As a result, it will show you several options to boot the Windows.
Hit on the ‘Repair Your Computer’ option. Now you have to wait for a few minutes until the Windows repair mode is fit for the further procedure.
When the Windows prompt to press the OK button, then hit on it. After that, select the account when prompted and hit the OK button. Then you have to type the password. Now you will see the system recovery options. Click on the System Restore option.
Now you will see all the restore points which are available on the Windows. Select your desired restore point from the Windows which suits the best for your system.
Hit on the Next button. Now the Lenovo laptop is restored to the preferred point. Keep patience until it restores the system of the Lenovo laptop. Hopefully, this will resolve the ‘Lenovo laptop stuck on logo screen’ issue.
Method 4: Without Lossing Any Data Boot The Lenovo Laptop
After following the above three methods if you still face the ‘Lenovo laptop stuck on Boot screen’ issue, then you need to perform the Windows Boot Genius. You need professional help to fix this issue. This tool can fix your various screen stuck problems without many efforts. This tool is a best and ultimate solution to get the screen stuck issues fixed immediately. Perform these steps to resolve your issue:
Download the software by going to the official website of Microsoft. Then install it and run the software on the system. A disk is required for the further process to boot the system. Therefore you have to prepare a CD or DVD or flash drive. Use the driver of the CD Rom to insert the DVD or CD. When you use a flash drive with the help of the USB port then you have to connect the pen drive. Hit on the ‘Burn in order’ option to start the process.
Insert the CD in a non-working system. Press the F12 key from the keyboard continuously to boot the system with the help of the CD or USB. Hit the Enter key from the keyboard, this will show you the page of the integrated program.
When you will see the UI of the software on the display, then you have to choose the proper cause which suits your situation. You can find the options on the menu which is located at the left pane of the Windows. After that, you have to follow the on-screen instructions.
On The Whole
Here in this article, we have provided all the possible solutions to fix the Lenovo laptop stuck on Boot screen. We hope, after successfully performing the above methods you can easily fix this issue.