The control panel of a router is also known as the router’s web interface. All the settings of the network are stored here and can be changed based on your preference.
If you have bought a router from Sprint then you must be knowing that it offers the first wireless router under the name Sprint Spark.
To get hold of its easy to install network connectivity then you need to learn how to login to its web interface. Here, we are going to mention the steps that are necessary to make any changes to your network after sprint login.
Instructions and Requirements
We will let you know the methods on how to log in and access the Sprint web interface. Following a straightforward way, you can easily access the Sprint web interface. These are the things below that you need:
- Sprint router.
- Internet accessibility. Does not matter if you are using a LAN cable or WiFi.
- A web browser, which you definitely have.
Now, follow the below instructions to login to your Sprint router for diagnostics and configuration.
Step 1: Double-check if are Connected to the Sprint Router
First, you have to connect to the network of Sprint router to get into the setup pages. So, connect to the internet using the WiFi or ethernet cable.
If you forget or do not know the Sprint router’s WiFi password, you should use an ethernet cable to do the same. You do not have to use any password to connect the Sprint router while using the ethernet cable.
Step 2: Go to the 192.168.0.1 through the Web Browser
Now, you have to put the IP address of your router on the address bar of the web browser that you intend to use. 192.168.0.1 is the most popular IP address of Sprint router.
If you see it is not working, you have to look for the default Sprint IP address from the list for the exact model you are using.
Step 3: Enter the Sprint Router’s Username and Password
Now, you will see a field of username and password where you have to put the current username and password of your router. Then, press the Enter button on the keyboard or click on the sign-in button.
These were the three essential steps to help you log in to the Sprint router. Now, you can configure the router based on your requirements.
Configure the Sprint Router
After getting into the Sprint admin interface by logging in, you can modify any available settings. You need to verify that while configuring your router the device is connected through a stable and secure internet connection.
Note down the current settings before you modify the present framework. Thus, if you face any issue after modifying, you will be able to revert back then.
What if the Network Stops Working after You Modify the Configuration?
If you have made any changes unknowingly then that might have broken the Sprint network, but you do not have to worry about that. Going back to the default configuration is quite easy. To do that you have to follow the generic 30 30 30 hard reset trick.
This the last option that you have. Furthermore, if you are still there in the Sprint interface, then log in and try to get the settings back. And do not forget to write down the original value before modifying the settings.