HP is a well-known brand that develops, manufactures, as well as markets an impressive range of electronic devices which includes desktops, laptops, printers and monitors and many more. Under all circumstances, these devices are reliable and can run without any trouble. The user commonly chooses HP devices because of their authenticity, style, and super performance. Despite being reliable, the HP device is not free of technical glitches. Most of the users complain that they are confronting HP laptop Error Code 601 quite often. Hence, it causes various severe problems as well. This error is mainly caused due to the internal battery problem. When you face this problem it indicates that the battery storage capacity has become very low and should be replaced with a new one.
On another respect, it indicates that before the battery gets worse, this error alert warns that you have to replace the old one with a new one. Moreover, you can use the system when this error is displayed on your system screen. In case, you are unaware of the process correctly, take help from this article. Here we are going to guide you with the most effective steps.
Easy Tips And Tricks To Fix The Error HP PC Error Code 601
Method 1: Re-Insert The Battery
The easiest and simplest way to get rid of this hp laptop error code 601 is to remove the battery and re-insert the battery. To do so, you can follow the below steps.
Step 1
To proceed further, you have to shut down the PC first.
Step 2
After that, unplug the power supply and remove the battery.
Step 3
After removing the battery, press the power button and hold for 25-30 seconds.
Step 4
After that, insert the battery back into your PC and plug in the power cord at the plug point.
Step 5
Then, restart the computer.
After restarting the PC check whether the error code is still there or not. If the error code still shows then follow the next method.
Method 2: Run The Battery Test
A battery test is a system diagnostic process that allows HP users to check their computers for battery performance to optimize usage. In order to run the battery test, check out the below mentioned.
Step 1
To do so, at first, shut down the HP computer.
Step 2
After that turn on it and press ‘esc’ option from the keyboard. When you press the ‘esc’ option, it will open the Start Menu.
Step 3
In the startup menu, press the F2 key to launch the Battery Test option.
Step 4
To manage the computer’s battery follow the wizard.
Method 3: Run PC Without Battery
To clean the HP PC error 601, run the PC without the battery. Here is the method to run the PC without a battery.
Step 1
To run the PC without a battery, firstly, turn off your PC.
Step 2
Unplug the PC’s power cord from the power supply and remove the battery.
Step 3
After that, plug in the power supply. And restart the computer. Your PC will run without the battery.
Step 4
Lastly, boot your computer and check whether the error still exists or not.
Method 4: Replace The Battery
If the above method does not help you to solve the issue then is the ultimate method. Just replace the battery with a new one.
However, make sure the battery is new and hasn’t fallen. This will prevent the use of damaged batteries that can affect the performance of your computer.
If you have encountered the Hp laptop error code 601, then you can follow the solutions mentioned in the sections above. Hope this write-up was helpful to fix the error. In case of any other views, please let us know in the comment section below.
