At times, Windows might show an invalid error code while running Adobe Acrobat reader. The error message reads as “The application was unable to start correctly 0xc0000022, Click OK to close the application.” Another user might get a different notification indicating that “System Restore did not complete successfully. Your computer’s files and settings were not changed. Details: An unspecified error occurred during System Restore (0xc0000022).” These two error notifications indicate that you can face this error message in two different situations either when you trying to initiate a program that is linked with Adobe Acrobat reader or when you attempt to perform a system restore.
In addition to failed application launch and system restore, the occurrence of such errors can make your device run sluggishly. In such situations, your device can crash and you get an empty black screen.
Possible Reasons Behind “the Application was Unable to Start Correctly 0xc0000022” Error:
There can be various factors responsible for this error code 0xc0000022. But, here we have mentioned the most prominent ones. So, without further delay, let’s have a deep look below:
- The error code 0xc0000022 can occur due to corrupted or missing registry files.
- Lack of administrative rights to the device might be another cause for the error.
- Besides, if your device is infected by malware or virus, then occurring such kind of error is quite common.
- Sometimes, such kind of error code also occurs if your device is connected to weak or unreliable internet connectivity.
- Also, if you are running an older version of Windows, then you can encounter this error during an ongoing task.
- A majority of users can experience this error if there are proxy configuration-related issues in your Windows-based device.
These are the most common factors that can trigger error code 0xc0000022. But, there are some other factors as well. Whatever be the reasons behind this error, fixes are available and relatively simple to perform. Thus, let’s walk towards the troubleshooting section and resolve this issue on your own.
Fix Error Code 0xc0000022: Complete Steps and Procedures to Follow
As per our words, resolving this particular error is quite simple. Just make sure that you perform them in the same order as we have mentioned and do not skip any step. Here are the most effective fixes that you require to perform to eliminate this error code from your Windows-based system.
Basic Steps to Resolve Error 0xc0000022:
Before performing any technical method, you can perform some basic steps. Thus, take a glimpse below:
- Primarily, you need to check that your device is connected to a strong and stable internet connection.
- After this, run the anti-malware program to scan your device to address any malware or virus that might be present on your device.
After performing these basic measures, if you still get stuck with the same error code, then you can take some strong action for resolving this matter.
Acquire Administrative Privileges
As mentioned earlier, error code 0xc0000022 can be a result if you don’t have administrative rights to the computer. In that case, you require to perform the following steps in order to determine if this is the main culprit. Thus, let’s begin:
Step 1: Primarily, you need to tap on the C or the driver which hosts the OS. After that, select its Properties and then navigate to the Security tab. Now, choose the Advanced button.
Step 2: Thereafter, you have to hit the Change button. Then, in the “Enter the Object name” box, enter your username and press the OK button to save the new changes.
Once you are done with the above steps, restart your device. After your device restarts, try to launch any Adobe-related product or perform a system restore to check whether the error gets removed or not. In case, you still experience the same error, then you should try out the next fix.
Check the Status of Software Protection Service
After receiving administrative privileges to the machine, if the error notification still appears on the display screen, then you might require to examine the status of the software protection service to verify that it is not stopped.
- At first, press and hold the Windows Home key + R key simultaneously on your keyboard. This action will open the Run dialog box. Once the Run dialog box opens, type “services.msc” and press the Enter button or click on the OK button.
- Now, look for “Software Protection.” Once you locate it, analyze the status and restart the service of it that has been stopped.
Lastly, reboot your device and check if the error gets eliminated from your device. Hopefully, it might be removed but if it isn’t, then proceed to the next one.
Run the System File Checker (SFC)
System File Checker is a built-in tool that is specially launched to repair corrupted or damaged system files. Therefore, if corrupted system files trigger this error, then after running the system file checker, the error should be resolved.
Step 1: Primarily, click on the Start button. Then, in the “Search programs and files” box, write “cmd” and hit the Enter button. Now, you have to press the combination of CTRL + Shift + Enter button. Now, hit the OK button in order to launch the Command Prompt.
Step 2: Once the Command Prompt opens, type “chkdsk/f/r” and hit the Enter key. Now, write Y in order to confirm the process.
Reboot your device to allow the disk check to run. After running the System File Checker, if the error is still there, then you can perform other built tools to resolve the error code 0xc0000022.
Use Hardware Troubleshooter
Hardware failure might influence the Windows files and cause such kind of errors. Thus, the device will display the error code 0xc0000022 while performing any task in Adobe products. Therefore, with this hardware troubleshooter, you can easily resolve this issue. But, if you do not know how to run the hardware troubleshooter, then follow the under-mentioned section:
Step1: First of all, you need to press and hold the Windows Home key and R key simultaneously on your keyboard to launch the search dialog box. Once the Run dialog box opens, write “Troubleshooting” and press the Enter button.
Step 2: Next, tap on the View All that is present in the top left corner of the active window. Now, you will find a list of built-in Troubleshooters. After that, select the Hardware And Devices and run the Troubleshooter.
Step 3: This troubleshooting process might take a few minutes to locate the corrupted or damaged system files. Once corrupted system files are located, it will automatically repair them. Now, hit the Apply button as well as the OK button to save the new changes.
Once you are done, restart your device to check if the error has been resolved.
Repair Windows Registry Entries
An improper file installation can trigger the error code 0xc0000022 on your Windows-based device. The files that are downloaded are not installed properly, so Windows shows you “The application was unable to start correctly 0xc0000022” error message. To repair this issue, follow the below-mentioned steps:
Step 1: Press and hold the Windows Home key + R key altogether on your keyboard. Now, write “regedit” in the Search dialog box and press the Enter button. This process will open the Windows Registry window.
Step 2: Now, in the Registry window, navigate to the left pane and select the option HKEY_LOCAL_MACHINE and go to the Software section. Next, tap on the Windows NT from Microsoft and go to Current Version.
Step 3: After that, click on Windows and launch the Applnit_Dlls. Now, right-click on the LoadApplnit_DLLs and reset the value from 1 to 0. Press the Enter button or choose the OK button to confirm the new changes.
Once you are done with the above steps, exit the Windows Registry Editor window and restart your device to check whether the error gets terminated from your device or not. If the error code still appears on your device, then try out the next method.
Perform System Restore
You require to perform a system restore in case the error code appears when you try to start any application related to Adobe Acrobat reader. To do this process, follow under mentioned steps:
At first, you need to press and hold the Windows logo key + Q simultaneously on your keyboard. Now, go to the Settings and click on the Recovery icon. Now, you require to choose the “System Restore” button from the list. Here, you need to select an earlier date when your device works perfectly without any hassle. After performing this action, reboot your device to check whether the error gets removed or not.
In this article, we have already discussed the solutions, which will ease up your pain and make things work for you. However, what about trouble still showing up from an unnoticed corner? Well, in that case, you can post your doubts in the feedback section below. On the other hand, you can get in touch with an expert for instant help.