The main benefit that Windows users usually get is that Windows 10 offers to reset the system and bring the Windows OS to the normal state. After applying this, you can also eliminate several bugs which might prevent the system from working in a normal condition. But sometimes, the users get an unexpected error message stating that “there was a problem resetting your PC: No changes were made”.
This resetting procedure can be rejected due to a couple of reasons such as a corrupted or missing system file.
So, in order to get rid of this situation, we have provided some possible solutions for this issue. Therefore, simply go through the solutions properly and perform them as mentioned in the upcoming section.
How to Eliminate the Error Message “There was a Problem Resetting your PC – No Changes were Made?
“There was a problem resetting your PC: No changes were made” error message might prevent you from restoring the Windows device to its original condition. Due to this, you might face several other issues also.
Therefore, you need a technical guideline to resolve the issue. If you are going through this problem, you can try some of the other fixes mentioned below and check which one works for you.
Fix 1: Perform a System File Checker(SFC)
Most of the time, this error message appears due to corrupted or damaged system files. Hence, to fix this problem, you should check the damaged files.
To check this, you can run System File Checker which is an in-built tool that comes with Windows.
To run this tool, go through the steps mentioned in the below section.
At first, press the Start button and type “cmd” in the search box. After that, hit the Enter button to open the Command Prompt window.
Now, right-click on it and open it as an Administrator. Next, enter the following command and press the Enter button to execute it.
“DISM.exe /Online /Cleanup-image /Restorehealth”
When the process gets completed, enter the command in the command box to launch the System File Checker tool on your device.
This tool starts to scan your device and locate the damaged files. Now, press the Delete button to clear the corrupted files.
Finally, close all the tabs and try to open the System Restore to check whether the error message still exists or not.
Fix 2: Use a System Restore Point
Another effective solution that you should try is to perform the System Restore if you are not aware of how to perform the task. Thus, go through the guidelines below and apply them.
At first, press the Start button and type “system restore” in the search bar. Now, select the Create a restore point from the menu.
Now, open the System Properties option and then click on the System Restore section. When the System Restore option window will open, click on Next to process to the next page.
If you found that show more Restore point, check it. Now, choose the desired Restore point and then click on the Next option.
Now, follow the on-screen guidance to perform the process. When the system is restored, the problem that you faced or removed completely.
Fix 3: Turn Off Reagents
Some of the users have reported that just by turning off the reagents temporarily, you can get rid of this issue. Hence, follow the steps discussed in the section below.
At first, press the Start button and type “cmd” in the search box. Hit the Enter button to launch the Command Prompt window. Next, right-click on it and run it as an Administrator.
After that, run the following commands and hit the Enter button every time to execute them.
First command: reagentc /disable
Second command: reagentc /enable
Now, try to reset your device and check if you are getting the same error message or not.
Fix 3: Run DISM Scan outside the Windows
You can fix the issue just by running the DISM scan outside of the Windows environment. To perform the action, go through the following steps and apply them accordingly.
To continue further, you should create Windows 10 installation media. There are several third-party tools present to create that.
Once you have successfully created that installation media, connect your device and then go through the following steps.
At first, boot your device from the installation media and then choose the desired language.
Now, click on the Repair your computer option which is situated at the bottom left panel of the system screen.
After that, select Troubleshoot and then move to the Advanced section. Now, open the Command Prompt window and enter “dism/get-wiminf /wimfile:E:sourcesinstall.esd” in the command box.
Thereafter, enter “mkdir d:scratch” in the command window and hit the Enter button to execute the command.
Further, type “dism /image:d /cleanup-image /restorehealth /source:esd:e:sourcesinstall.esd:2 /scratchdir:d:scratch /limitaccess” and press the Enter key.
If everything is great, then the DISM tool starts to scan your device and repair the damaged files.
Fix 4: Refresh Windows from the Windows Defender
If you are encountering there was a problem resetting your PC Windows 10 error message,
then you can get rid of this situation just by refreshing your device with the help of the Windows Defender.
If you do not know how to use it, then check out the instructions provided underneath.
First of all, press the Windows key and I key simultaneously to open the Settings option. Now, move to the Update and Security section.
From that section, choose Windows Defender and click on the Open Windows Defender Security Center option.
After that, move to the Device performance and health section. Now, click on the Additional Info under the Fresh section. Lastly, click on the Get Started button to expand it.
After completing the process, check whether the problem gets fixed or not.
We hope that one of the solutions discussed above will definitely help you to resolve the error message “there was a problem resetting your PC.”
Furthermore, if you face any problems while performing any steps, please do inform us by commenting in the comment section below. You will get advanced solutions and suggestions there. Otherwise, you can also get help from a professional.