The page fault in nonpaged area Windows 10 usually results in a Blue Screen Of Death. This error occurs when Windows fail to find the file which it expects to find within a specified memory. The issue might be caused due to any hardware or any software fault. It can work either due to faulty or damaged RAM or because of any corrupted driver. Another reason behind the occurrence of this error can be an aborted Windows update.
Effective Methods On How To Fix Page Fault In Nonpaged Area Windows 10 Error
Every time the page fault in nonpaged area Windows 10 occurs in your PC, the system will crash. But after crashing of your PC, if you fail to log in to your computer, you can perform a hard reboot. If then, the issue does not reresolve follow the troubleshooting methods described below.
Whatever be the reason behind this error, it can be solved with a few simple steps:
Method 1: Use Windows Advanced Options To Fix Page Fault Issue
If you get stuck at the blue screen error page and find that your PC is restarting without even blinking, then at first, you just need to force shut down your PC by pressing the OFF button. When the PC restarts, you need to enable F8 key in Windows 10 for opening a new boot screen with Windows Advanced Options menu. Then, ensure that it is running in Safe Mode and after that select the “Select last known good configuration option” option from it. This will temporarily stop the page fault in nonpaged area Windows 10.
After performing this step, when you restart your computer, you need to press F12 for a few seconds and you will get a display of the completely new menu. Now, you have to locate and select the Disable Memory Cache option. After that, you need to save the settings and click on Exit option. Then, allow your computer to boot and press Windows key + R to open the Run dialog box. Next, enter the “chkdsk/f/r C:” command in that box and hit on Enter button. This will efficiently resolve the issue in your hard drive. But if you are still facing the page fault in nonpaged area Windows 10 error, then try out the next method.
Method 2- Remove And Reinsert RAM
The page fault in nonpaged area Windows 10 might also occur due to the defective RAM. Unfortunately, this error is not limited to any particular OS and thus can appear in any version of Windows. You need to check your RAM; if you find this defective, then you need to remove and replace it with a new one. But this is only possible if your PC consists of only one RAM chip. Sometimes, the RAM also cause issues because of power failure. This can be easily solved by removing your RAM chip from the port and then reinsert it properly. But while doing this, ensure that your PC is shut down and you have removed all the power cords and the battery from it. After you have reinserted the RAM, you can check it whether the error is resolved or not by restarting your computer and verifying.
Method 3: Adjustments In The Paging, File Manager
If any hardware issue is not the reason behind the occurrence of this error in your PC, then this simple solution will pull you out of this difficulty. You need just to follow some simple steps:
- First of all, open the Control Panel and from there, select “System.” Right click on your computer screen and choose “Properties.”
- Now go the left-hand side and choose the Advanced System settings.
- After that, click on the “Advanced” tab and then select the Change button from the Virtual Memory title.
- Next, to that, you need to choose the Performance option and then select Settings from there
- Thereafter, you need to uncheck the “Automatically manage paging file size for all drives” option.
- From there, select No paging file and hit on OK button as many times to get out of all the Windows dialog box.
After walking through these steps, you have to restart your PC and again follow the same steps described above. But to an exception, this time you need to check this option “Automatically manage paging file size for all drives.” Then, select the System Managed Size.
Method 4- Uninstall The Anti-virus Software To Fix The Issue
One of the major culprit behind the page fault in nonpaged area Windows 10 error is the anti-virus software. It might complicate and cause conflicting errors, so under such situation, it is best to uninstall the antivirus software and then, restart your computer.
Method 5- Update the Outdated and Faulty Driver
It is known to everyone that Windows drivers are essential and whenever any new version of the driver is launched, it comes with its set of advantages and disadvantages. If your driver is outdated or faulty, then you need to update this piece of hardware to the latest version to fix this page fault in nonpaged area Windows 10 error. You can easily identify if your device has faulty hardware, as it will show a yellow exclamation mark.
Fixes To Try!
After that, you need to follow the steps discussed below:
- At first, click on the Start button and then click on the Device Manager option.
- After that, right click on the device, whose driver you have recently updated and then again, select the Roll Back Driver option. Another way through which you can do this is by choosing the Properties option. After that, click on the “Driver” and at last, click on the Roll Back Driver button.
If you don’t find any suitable solution listed above, then it means that this is the only driver installed on your PC for that particular device. Finally, you can press the Uninstall option and restart your PC. This will automatically reboot your Windows and install the driver in your PC.
These are some of the best ways through which you can easily solve the page fault in nonpaged area Windows 10 error. But still, if you find that the error persists, get in touch with an experienced professional to resolve the issue with the best possible solutions.