Learn The Most Appropriate Solutions to Resolve Error Code 0XC000000E

While trying to boot up the Windows device, the users usually confront error code 0XC000000E. When the Windows device boot up, it usually means that you are dealing with the corrupted or damaged Boot Configuration data. There are several reasons behind the occurrence of this error code. But the top contender is always a faulty boot sector. Apart from that when the file system integrity is compromised, you will get this black screen error code. Moreover, boot error code 0XC000000E is also caused by the misconfiguration in the registry hive. If you are suddenly stuck with this error code and do not have any idea on how to deal with this, then check the methods that we have provided in the below section.

Easy Troubleshooting Methods for Error Code 0XC000000E:

Mainly, the boot error code 0XC000000E occurs due to the issue in Boot Configuration Data. This is an essential store to modify various settings for the Windows device. No matter what are the reasons behind this issue, you need to troubleshoot it. Hence, if you want to solve the issue by yourself, you need to go through this article thoroughly and apply the solution stated in the section below.

Fix 1: Check Hardware

Before going to the advanced software troubleshooting method, you need to check the hardware. Mostly, the error occurs due to the corruption of the boot manager. Hence, you need to remove and disconnect the peripherals device that you have connected. After that, restart the system a few times and check whether the hardware is inflicting the problem. Also, you can remove the RAM and hard disks from your device for a few seconds. Remove the foreign particle from the RAM and hard disk. Now, get them back in their own place properly.

Also, disconnect the power cord and resolve the boot issue.

Fix 2: Rebuild Registry Hive

If the hardware check is not able to resolve the issue, then you need to recreate the BCR registry. Boot Configuration Data is an important part of your system that needs to be in proper condition. Due to some fault in the BCR registry or registry hive, the error 0XC000000E Windows 10 pop-up. Therefore, to repair it, you need to install the bootable media.

After that, follow the steps that are mentioned in the section below.

  • At first, launch the Windows Setup box and set the value appropriately. Now, select your language.
  • After that, click on the Repair your computer option which is available lower-left corner of the system screen.
  • From the Troubleshoot option, locate the Advanced options and then select the Command Prompt option.
  • In the Command Prompt box, type the following command one-by-one and hit the Enter button each time.

First Command: bootrec/scanos

Second Command: booterc/fixmbr

Third Command: bootrec/fixboot

Fourth Command: bootrec/rebuildbcd

  • After executing the above command, restart the system. Now, your device will open without any error code.

Fix 3: Check the BIOS Settings

If the CMOS battery is not working properly, then you might confront this issue. You need to check the BIOS setting. To reconfigure the BIOS settings, you need to restart the system. Then, shut down the system and disconnect all the power cord that is connected to the device. Remove the battery from the system. To discharge the system, press the Power button for a few minutes. After that, place the new battery into the socket in the CMOS battery. Finally, switch on the computer and configure the BIOS and check the status of the error code.

Summarizing Remarks

By following the above fixes, you can able to resolve the error code 0XC000000E on your own. Read these guidelines carefully and apply the steps described in the above section. Finally, if you have any queries or suggestions, do post them in the comment section provided below.

Nathaniel Villa
Nathaniel Villa