Easy And Effortless Ways to Fix External Hard Drive Not Showing Up Mac Issue

Usually, when the users connect an external hard drive into their Mac OS based system, they get a mount option on the main desktop window. However, sometimes, this play feature of the Mac OS don’t work like as it should and gives out the external hard drive detection issue. Most of the time, this issue is caused by some simple human errors and software misconfigurations of the OS. But, in a few situations, this issue is created by some serious hardware problems. Now, if you are one of those users who is encountering the external hard drive not showing up Mac OS based system, then follow this article. This is because we have provided every possible fix to this error here. Now without wasting any time, let’s have a look at the most appropriate solutions to fix this error.

Prominent Reasons for the Occurrence of the External Hard Drive Not Showing Up Mac:

In this section of the article, we have provided some examples of those problematic factors which may create the Seagate external hard drive not showing up Mac issue. Thus, have a look at them.

  1. The external hard drive isn’t plugged in properly
  2. Faulty USB cables
  3. The USB or flash drive port of your Mac is faulty.
  4. Incorrectly formatted external drive
  5. The Mac is not set to display external drives
  6. File corruption issue in the external hard drive
  7. The external hard drive is faulty or damaged.

Now, if you have analyzed all the possible causes of this issue, then move on to the next section of this article where solutions have been described.

Top-notch Solutions to Eliminate External Hard Drive Not Showing Up Mac Issue:

To fix this issue, you have to follow some simple and straightforward solutions provided below.  Have a look at them and try to use them as instructed.

Modify the Finder Settings

One of the most common reasons for Seagate external hard drive not showing up Mac is because the system not being set up properly to show any external hard drive on the main desktop window. To fix that setting misconfiguration, the user needs to change the Finder settings manually. Now, if you want to perform that task on your system, then follow the given steps.

  1. Open the Finder window and click on the Preferences option. This will launch the Finder Preferences window on the screen.  
  2. There you need to tap on the General tab.  In that tab, you need to check whether the External disks option is enabled or not. If not then, click on that box which lies beside that option in order to enable it.

After that, connect the external hard drive on your Mac OS based system and verify the status of the issue. Now, if Mac isn’t recognizing your external hard drive automatically, then you need to do it manually. To execute that task on your Mac, follow the given steps.

  1. Go to the System Preferences window and then click on the Disk Utility option.
  2. This will open up the Disk Utility window on the screen. There you will find your external hard drive listed on the left side of the window.
  3. Select your hard drive and then click on the Mount option. Now, it should appear under the devices option in the Finder window.

However, if the external hard drive still not appearing on your Mac, then try out the other solutions which are given in this article.

Run the First Aid Tool on your External Hard Drive

The First Aid is an inbuilt troubleshooting tool which is designed to verify and repair almost every Mac OS related issue. Thus, it is quite possible that the same tool is able to fix this issue on your Mac OS based system. To try out this tool, follow the given instructions.

  1. Launch the System Preferences window and then click on the Disk Utility option in order to launch its window.
  2. There you need to click on select the external hard drive option and then click on the First Aid option.
  3. Now, a pop-up box will appear on the screen. In that box, you need to click on the Run button in order to start the diagnostics and repair process.

After the repacing process gets completed, check whether the external hard drive recognization issue is fixed or not.

Conclusion

However, if even after following all the above solutions, you are unable to fix the external hard drive detection issue, then it might be possible that your external hard drive is faulty. Further, you need to replace it with a new one to fix this issue. Now, to verify this problem, plug-in your external hard drive into a different Mac OS based system and verify the status of the issue.

We hope that our solutions and suggestions are helpful to you regarding the external hard drive not showing up Mac situation. But, if you need more information on this topic, then keep following our upcoming articles.

Nathaniel Villa
Nathaniel Villa

Fatal error: Uncaught Error: Undefined constant "REQUEST_URI" in /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php:4 Stack trace: #0 [internal function]: callback() #1 /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php(29): ob_end_flush() #2 /var/www/internettablettalk.com/public_html/wp-includes/class-wp-hook.php(324): buffer_end() #3 /var/www/internettablettalk.com/public_html/wp-includes/class-wp-hook.php(348): WP_Hook->apply_filters() #4 /var/www/internettablettalk.com/public_html/wp-includes/plugin.php(517): WP_Hook->do_action() #5 /var/www/internettablettalk.com/public_html/wp-includes/general-template.php(3068): do_action() #6 /var/www/internettablettalk.com/public_html/wp-content/themes/blocksy/footer.php(28): wp_footer() #7 /var/www/internettablettalk.com/public_html/wp-includes/template.php(790): require_once('...') #8 /var/www/internettablettalk.com/public_html/wp-includes/template.php(725): load_template() #9 /var/www/internettablettalk.com/public_html/wp-includes/general-template.php(92): locate_template() #10 /var/www/internettablettalk.com/public_html/wp-content/themes/blocksy/single.php(20): get_footer() #11 /var/www/internettablettalk.com/public_html/wp-includes/template-loader.php(106): include('...') #12 /var/www/internettablettalk.com/public_html/wp-blog-header.php(19): require_once('...') #13 /var/www/internettablettalk.com/public_html/index.php(17): require('...') #14 {main} thrown in /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php on line 4