Internet Tablet Talk
Image default
Windows

Exact Methods to Fix Windows has Detected an IP Address Conflict

Many Windows 10 users frequently complain about encountering severe network errors like Windows has detected an IP address conflict issue. The error occurs due to the misconfigured settings of the router you are using. It happens if another computer if using the same IP address that you are working. Go through the article to know the exact steps that you need to take if you encounter the same error.

Measures Taken To Resolve Windows Has Detected An IP Address Conflict

Follow the easy, yet effective procedures given below to remove the Windows has detected an IP address conflict Windows 10 error instantly.

Method 1: Restart Your Router

The router you are using might malfunction and fail to assign an appropriate IP address to the devices that are connected to it. Often restarting the router removes the bug, thereby resolving the Windows has detected an IP address conflict error. Switch off the router and wait for a few seconds. Now, turn it on again. Wait again for a few minutes to settle down the router and then connect the devices again.

Method 2: Release And Refresh IP Address

To fix the Windows has detected an IP address conflict Windows 10 error, you need to release or refresh the IP address. To do so, go through the following steps:

1. At first, click on the Start menu and in the search box, type the “cmd” command.
2. Now, you need to choose the Run as administrator option.
3. When the black Command Prompt window appears on your computer screen, you need to type “netsh int ip reset c:\resetlog.txt”, “ipconfig /release”, ‘ipconfig /renew” commands. Press the Enter key after entering each of the commands.
4. Now, check if the Windows has detected an IP address conflict Windows 10 error resolves.

Method 3: Remove The Static IP

Another way to resolve the Windows has detected an IP address conflict Windows 10, remove the Static IP. To achieve the process, follow the steps as given below:

1. Press on the Windows logo key and R at the same time to invoke the Run dialog box.
2. Now, in the blank space, type the ncpa.cpl command and hit OK.
3. Upon using a wired connection, right-click on Local Area Connection. Alternatively, if you are using WiFi, click on the Wireless Network Connection option. Now, you need to select Properties and then double-click on the Internet Protocol Version 4 (TCP/IPv4) option.
4. Then, you need to choose the Obtain an IP address automatically and also the Obtain DNS server address automatically option and click OK. Then close all the windows and wait until the process ends. Finally, restart your system and check if you are still struggling with the same error.

Method 4: Update Driver

The error might also occur due to incorrect, missing or outdated card driver. Therefore, to fix the Windows has detected an IP address conflict you can install the latest version of the drivers. You can update the drivers both manually and automatically.

Manually Upgradation

To manually download the correct and the latest version of the driver, you need to visit the manufacturer’s website. Now, on the site, you need to locate for the correct driver which is compatible with your device and then download them. When the process finishes, reboot your system.

Update Automatically

You can also update the drivers automatically by scanning the computer. Scanning will help to detect the errors with the drivers. Now, you can click on any of the Update and Update All options. If you want to install the driver manually, you need to select the Update option.  However, if you wish to download and install the drivers automatically, choose the Update All option. The process will take a few minutes to complete the process, then restart your system. Now, check if the Windows has detected an IP address conflict glitch persists.

Via Device Manager

Along with the other two methods, you can also upgrade the latest driver via the Device Manager. Go through the following steps.

1. First, you need to press both the Windows logo key and R together.
2. When the Run dialog box pops up, type the ‘devmgmt.msc.’ command and hit the Enter key.

When the Device Manager window appears, double-click on the USB controllers option and select the ‘USB Composite Device’ option. Now, choose the ‘Update Driver Software.’
3. Now, you need to click on the “Search automatically” option. It will search for the latest updates automatically and then update the driver software.
4. When the wizard pops up, you need to follow the on-screen instructions and complete the process.
5. Reboot your device and check if you are still struggling with the error.

Related posts

0xc1900101 Error Code Issue In Windows 10 – How To Fix

Nathaniel Villa

Learn How To Troubleshoot And Fix Error 0x800f081f

Nathaniel Villa

How To Turn On Bluetooth On Windows 10: Fix With A Step-By-Step Tutorial

Nathaniel Villa