Ethernet connection establishes a secure and steady internet connection by avoiding simultaneous transmission. Most of the people prefer it for its speed and incredible functionalities. However, Ethernet not working Windows 10 is one of the annoying factors for regular users. It interrupts the internet connection in different ways. Sometimes the connection fails, and sometimes the internet fails to work. However, the major factors responsible for this problem are either cable or software conflicts.
Resolve Ethernet Problem With Easy Troubleshooting Steps
You can use multiple ways to fix the issue of Ethernet not working Windows 10 immediately. The fundamental problem arises due to the network setup. Another reason may be the corrupted system files which prevent the Ethernet device recognition process. Besides this, the common problem is malware attack which damages the disk spaces as well as creates the Ethernet connection error by creating multiple corrupted files.
Verify Cable And Port
Sometimes, a defective cable causes the problem in the internet connection. So, you need to replace the Ethernet cable immediately to avoid this conflict. Again, the port issue is another troublesome factor in establishing a smooth internet connection. If you find the port is damaged, use another one and repair the problematic port as soon as possible to fix this kind of annoying issue.
Disable And Again Enable Wi-Fi
Right-click on the Wi-Fi icon and choose Open Network and Internet Settings. In this Networking Settings window, you will get multiple tabs, click on Wifi. Now make it Toggle Off by sliding the bar to the extreme right. Finally, turn it on and check the Signal is steady or not.
Enable Ethernet Connection
At first, right-click on the Wifi icon and open Network and Internet Settings section. Now, check the Ethernet status if it is enabled or not. Then, choose the correct network and set Local Area Connection as the default network type. If you find it is disabled, then right-click on the icon and select Enable. It will take a few seconds to create a smooth connection.
Turn On Ethernet Device
Press Windows key from the keyboard and open the Start menu. Type “devicemgmt.msc” in the search box and hit the Enter key to open the Device Manager window. Choose the Network Adapters Category from the list of installed hardware and expand it. Under this section, you might click on the Computer icon with a download facing picture sub-menu.
Here, you can find your Ethernet Card Device Name. It will provide you with the status of the Ethernet device. However, if you see the disabled state, then right-click on it and tap Enable from the pop-up menu. Now, confirm it by tapping the Yes button from the dialog box. Finally, restart your system and try to connect with the Ethernet cable to check the Ethernet problem is removed or not.
Update Ethernet Driver
An outdated Ethernet driver won’t be able to generate a steady connection between the Device and the Ethernet cable. Even, it can’t be detected by the system if the version is incompatible.
At first, open the Device Manager window and go to the Network Adapters section. Now, expand that menu and choose the Ethernet driver icon. Right-click on it and tap on Update Ethernet Driver. Then, click on Search automatically for updated driver software to start the process.
After that, it will be updated. Once a driver is found, it will take several minutes to finish the upgrading process. But, make sure that your device has sufficient memory to download the upgraded version of Ethernet. So, wait until this process is completed and displaying the message.
Disable Security Software
An outdated security software causes the Ethernet not working Windows 10 problem. Malware attacks the disks and spread the viruses by creating multiple copies without notifying the users. As a result, the internet connection becomes sluggish. Beside this, high-security Firewall settings prevent the functions of the Ethernet.
First, tap the Start menu and open it. In the Search box, type “Control” and press Enter from the keyboard to open the Control Panel window. Click on Programs and Features from a list of programs. Click on ‘Uninstall A Program’ option under it.
Here, you will find a list of installed software. Now, select the installed Antivirus Software Installer and its associated software. Right-click on them and choose Uninstall to remove the software from your system.
It will show a warning message, “Do You Want To Remove It?” Click on Yes to confirm the disabling. Again, disable the Firewall Settings by sliding the bar to the extreme right of Firewall setup. When done, restart the PC and check whether Ethernet malfunction issue is resolved or not.
Run Windows Troubleshooter
Most of the time, running of the Windows Troubleshooter can fix the Ethernet Not Working Windows 10 issue quickly. Moreover, it is the best way to utilize the internal memory quickly which can the indirect method to avoid the Ethernet issue.
Press Windows key from the keyboard and open the Start menu. You will find the settings app (Gear icon) from the left side of the list. Now, go to the Update & Security section and Click on the Find button from the bottom part of the window.
Click on ‘Run the Troubleshooter’ from this window and click on the Start to start the Troubleshooting process. After that, follow the on-screen instructions to complete the process. It will take several minutes to finish the process successfully. Finally, restart the system and try to connect the Ethernet cable to create an internet connection.
In the above article, we have analyzed the various ways to overcome the Ethernet not working Windows 10 efficiently. Moreover, you can fix the Ethernet driver issue by performing the upgrade process. In addition to that, you might keep your system safe by troubleshooting harmful viruses. However, this context will be helpful to resolve the significant Ethernet Port issue problem quickly, especially for the non-tech-savvy person and identifying the resource conflicts of an Ethernet cable connection.