DNS Server Not Responding – Easy Ways To Get It Working Again

Windows 10 is one of the most popular among all the computer Operating Systems. It has all the features that you might need to perform any kind of task. And now, in the age of the internet, if you have to perform any task of significance. That is going to need an effective DNS server, but what happens if it goes wrong for some reason. Then all those important tasks are going to be on hold and cause you losses. The DNS Server not Responding on Windows 10 is one of the main issues with this part of the system.

In case you are currently facing this issue. Then, do not worry, as you will be able to fix this by yourself. In this article, we have laid down all the necessary solutions to this problem. With that, you are going to be able to resolve the DNS server not responding Windows 10 issue.

Reasons “Why the DNS Server Not Responding Issue is Occurring?”

As we have said that this issue is something that you will be able to fix all by yourself. But, it is not as easy of a task as it might sound.

Windows 10 is a very complex piece of technology, and it has a lot of functional components. If you go ahead and start tweaking it. Then the system is going to be vulnerable to a lot of different issues.

Moreover, all the solution methods here are very technical. You might find it hard to understand and then implement all of that.

That is why you need a sound understanding of the possible reasons behind the DNS server not responding issue. This is going to give you 2 benefits when it comes to solving this error at hand.

You are going to find it relatively easier to understand and then, implement the solutions that we have listed. That is going to save you a lot of time while you are carrying out all these instructions.

The other one is that you will be able to work around a lot of problems that you might have caused. If you did not know the reasons behind the DNS server not responding on Windows 10 error.

That is why in this section of the article, we have put forth all the possible causes behind this error.

The Specific Technicalities of this Issue

One of the most prominent reasons behind this issue is that with the cache. With usage for extended periods of time, the cache accumulates memory.

Then, there comes a point where the cache faces complete saturation where it will not be able to store anymore. This can lead to a whole host of issues with the DNS server. And the most common scenario with that is the DNS server ceases to respond.

Other than this, another possibility is that there can be certain issues with the address of the server.

The server address is a very important thing. And it has to be correct for the entire system to work properly. But in case of any errors with that, the DNS server would have problems in it. And as usual, you are going to face this issue of an unresponsive DNS server.

Finally, another scenario that a lot of users come across is that of an out-of-date network adapter driver. This might also be the case for you and because of this, proper functioning and response of the DNS server.

And now that you know why this particular technical glitch occurs in your Windows 10 PC. It is time to take a look at the solutions for this error.

How to Resolve the Windows 10 DNS Server Not Responding on Windows 10 Issue?

In this section of the article, let us go ahead and take a look at how to fix this error. It will be best if you can identify the exact cause of the issue in your case.

That way, you will be able to go straight to applying the solution for that. But, if you do not have that information, it is not a problem.

Apply the solutions one after another till you get the DNS server in your Windows 10 PC to respond again.

Get the Latest Network Adapter Driver Updates

Let us start by tackling the simpler things, and in this case, it is going to be the network adapters.

These software components are very important and are going to need the latest driver updates. That way, you will be able to avoid issues like this one and similar others.

Following are the steps you will need to take to get those updates –

  • In the search panel on your home screen, type in Device Manager. Then, click on the option with the same name to open up the Windows Device Manager.
  • Once you are in that window, look for and click on the Network Adapters category.
  • Now, look for the DNS server and right click on it. From the dropdown list choose the Driver Update Software option.
  • Then, choose the Search automatically for updated driver software option. Then, you will have to follow the on-screen instructions from there on.

After you have done all of that, click on the Close option. Finally, to implement the new updates, restart your computer.

Clean Up the DNS Cache

A saturated cache can cause a lot of problems. And to solve all of that you will have to delete unnecessary memory. And then you will have to reset the IP address to completely fix that problem.

  • In the search panel on the home screen of your Windows PC, type in cmd.
  • From the list of results that appear, right click on the Command Prompt option. From the dropdown list, select the Run as administrator option.
  • Now, in the Command Prompt window that appears, type in these commands one after another – ipconfig /flushdns, ipconfig /registerdns, ipconfig /release, ipconfig /renew. Make sure to press the Enter key after each of these commands.

After you have done all of this, close the Command Prompt window. From your web browser, check if you are able to access the websites you want to or not.

Set the DNS Server Address Right

An incorrect DNS server address can cause a lot of technical glitches, and this one is among the obvious ones. So, you will have to set it right to solve the response issue of the DNS server.

Here are all the steps that you are going to have to take to make that happen:

  • Open up the Run dialogue box by pressing both the Windows key and the R key at the same time.
  • In that dialogue box, type in the command control and hit the Enter key after that.
  • Now, click on the Network and Sharing Center in the Large icons category.
  • Then, click on the Change adapter settings option.
  • In the next window, look for the Local Area Connection option. You might have to look for either Ethernet or Wifi depending upon your system. And then right-click on that option to bring up the dropdown list.
  • In that dropdown list, find and then click on the Properties option.
  • After that, look for the Internet Protocol Version 4(TCP/IPv4) option. Then from there, click on the Properties option there.
  • Then, look for the Obtain an IP address automatically and Obtain DNS server address automatically. Check the boxes next to these two options and finish by clicking on OK.
  • Again, click on the Internet Protocol Version 6(TCP/IPv6) and after that, on the Properties.
  • Once again look for the Obtain an IP address automatically and Obtain DNS server address automatically. Finish by clicking on the OK button as always.

This completes the process of setting the DNS server address right. Now, just go ahead and try to access the website that you want to and see if it is working or not.

Switch Off the Network Devices and Turn them Back On Again

This is the last resort method for fixing this issue. And we recommend that you go for this if the other ones have failed to deliver.

You can just go and restart the modem and the router that you have. To do that, here are the steps that you are going to have to take –

  • On the boy of these network devices, look for the power button. And then use that to turn the power for these devices off.
  • Wait for sometime before you attempt to turn it back on again.
  • Then, use the same Power button to turn both the modem and the router back on in the usual manner.

After you have performed this task, check whether the DNS server of your Windows 10 PC is working or not.

If it is alright, then you will be able to open up any website that you might want to.

Conclusion

Now, after going through this article, you will be able to fix the DNS server not responding issue. But, it might sometimes be the case that you still are not able to fix this technical glitch.

In that case, you might have to get in touch with expert professionals who can solve that for you.

With complex technologies like computer operating systems and related components. It will be best if you can get the help of experts. Because beyond what you can solve with instructions, you might end up doing more damage.

Nathaniel Villa
Nathaniel Villa

Fatal error: Uncaught Error: Undefined constant "REQUEST_URI" in /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php:4 Stack trace: #0 [internal function]: callback() #1 /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php(29): ob_end_flush() #2 /var/www/internettablettalk.com/public_html/wp-includes/class-wp-hook.php(324): buffer_end() #3 /var/www/internettablettalk.com/public_html/wp-includes/class-wp-hook.php(348): WP_Hook->apply_filters() #4 /var/www/internettablettalk.com/public_html/wp-includes/plugin.php(517): WP_Hook->do_action() #5 /var/www/internettablettalk.com/public_html/wp-includes/general-template.php(3068): do_action() #6 /var/www/internettablettalk.com/public_html/wp-content/themes/blocksy/footer.php(28): wp_footer() #7 /var/www/internettablettalk.com/public_html/wp-includes/template.php(790): require_once('...') #8 /var/www/internettablettalk.com/public_html/wp-includes/template.php(725): load_template() #9 /var/www/internettablettalk.com/public_html/wp-includes/general-template.php(92): locate_template() #10 /var/www/internettablettalk.com/public_html/wp-content/themes/blocksy/single.php(20): get_footer() #11 /var/www/internettablettalk.com/public_html/wp-includes/template-loader.php(106): include('...') #12 /var/www/internettablettalk.com/public_html/wp-blog-header.php(19): require_once('...') #13 /var/www/internettablettalk.com/public_html/index.php(17): require('...') #14 {main} thrown in /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php on line 4