Though Canon printers are one of the best-selling printers in this world, sometimes it starts to malfunction and ultimately leave the users puzzled.
But like other electronic gadgets, Canon printers also have some issues as well. Canon printer error code 6000 is one such problem that is very common and many users have complained about this issue.
Due to multiple reasons, you can get this error code on your device. Let’s have a look at the problem-causing factors and know more about it.
When the paper feed tray of your printer gets blocked by paper pieces, then you might get this error notification.
Apart from that, due to an incorrectly fitted tray, your printer may start malfunctioning and lead to this error code. If you are trying to print multiple commands at a single time, then your Canon printer becomes unable to load the work pressure and stops working as well.
By any chance, if any sort of slight defects arises in the sensor unit, then there is a huge chance of encountering the same issue. Last but not the least reason is scratched or smeared line feed sheet.
In case, you have ever experienced the same problem in your Canon printer, then you should find the best methods that can mitigate this error completely from your device.
Keeping that in the mind, here we are going to discuss some effective methods following which you can definitely get rid of the issue at the earliest possible.
How to Fix Canon Printer Error Code 6000? Follow These Stepwise Instructions
First, we recommend you to go through the reasons responsible for the occurrence of this error on your Canon printer. If the reasons are known to you, then fixing the problem will become much easier for you.
Here, we have mentioned some tricks that will be enough for you as well. Hence, follow all of them one by one and check if the error gets fixed.
Trick 1: Reset and Restart your Canon Printer
The first and foremost thing that you can do is to restart your printer and check if the error gets fixed automatically.
For doing the same, you need to go through the steps that are mentioned in the next section.
- First of all, you need to unplug the printer from the power and leave it for a few moments.
- After that, you need to plug the power cable into the power supply and turn the printer on.
- Further, tap and hold down the Power key for a few moments.
- Now, hit on the Stop button twice.
After hitting the button twice you need to repeat the whole process once. But remember to release the buttons slowly and then tap on the Stop key four times.
In case, you perform the above methods properly, then you will surely get rid of the error code automatically. But if the problem is not solved yet, then follow the next method as well.
Trick 2: Replace the Defective Part
Due to an outdated part or a defective part of the printer, the error code 6000 might occur on your Canon printer.
In such cases, you have to inspect the LF/EJ slit film, timing sensor unit, logic board, paper feeder motor, and paper feed roller unit very minutely.
Identify the faulty part and replace that part or repair it properly. This may resolve the problem completely.
Hopefully, you will be benefitted from the above two methods described here. You can easily resolve the Canon printer error code 6000 by following the steps described exactly in the same manner.
But if you have any queries regarding any method, then leave your comment in the comment box below. Moreover, you can also follow our website for more tech-related posts.