Arris SB6190 is generally a cable modem with 32 downstream x8 upstream bonded channels which make it ideal for the home network.
However, for performing the router setup and configuration, you have to log in to the SB6190 router.
Also, if you wish to enable or disable the guest wi-fi network, or you want to secure the wireless network, apply the login procedure.
Want to know how you can log in on your own? Take help from this passage.
Arris SB6190 Login Instructions:
Before continuing with the login procedure, make sure you have a strong internet connection. Also, you should have a personal computer to access the web browser. Now, take a look below.
Turn on the computer. Wait for some time until it starts properly. Afterward, launch a web browser and enter ‘192.168.100.1’ within the address bar.
Press the Enter key.
If you have successfully entered the IP address, you will see the login credentials page. Now, have a look at the backside of the router. Here you will see the default login credentials.
However, if you are unable to see the login credentials, check the manual of the router. The most common username and password are given below.
If you are still unable to login, it is quite possible someone might change the login credentials. In such a scenario, you have to do a hard 30-30-30 reset the router. Here is,
How to Perform a 30-30-30 Reset?
First, ensure that the router is turned on. Next, press the Reset button for 25 to 30 seconds. To press the Reset button you can easily use a paper clip or something sharp.
You can see the Reset button at the backside of the router. While holding the reset button, you have to unplug the power cord of the router. Keep pressing the Rest button for another 30 to 40 seconds.
Frequently Asked Questions
How to log in to the Surfboard Modem?
In order to access the surfboard cable modem, first, open the web browser and then enter the 192.168.100.1 within the address bar. After that, the Status page will appear on the screen.
How you can find the IP address of the Modem?
First, go to the Start menu of the computer. Then, type ‘run’ within the search box and select Run from the available options. Enter ‘CMD’ within the search field and hit the Enter key.
It will then open the Command Prompt. Within the Command Prompt, type ‘ ipconfig’ as well as hit the Enter key.
Unable to Connect to the Router Wi-Fi:
First, see if the laptop has a wi-fi button or not. Ensure that the wi-fi is on. Reboot the laptop. Also, restart the router. Besides that, make sure that the WLAN lights are flashing.
Also, check if the SSID is broadcasted or hidden. Besides that, you have to remove the wireless profile. Enter the password.